| The temperature on the mixing valve is adjustable between 20° - 65°C which complies with the requirement of BS 1264-4 2009 for initial warm up temperatures of between 20° - 25°C and a locking pin to set maximum blend temperature. It has an additional probe pocket for an optional over temperature device to be installed. A throttle to increase the Kv of the mixing valve for larger systems. A built in non-return valve above the circulation pump to prevent back filling during the system fill and also reduces water loss if the circulation pump needs to be removed for maintenance.
Features and Benefits Precision engineered materials and market leading high-efficiency pump technology provide long lasting and leading performance. Inclusive temperature control ensures that the water temperatures entering the floor do not exceed design temperatures. Built in thermostatic actuator with temperature range between 20°-65°C for system design across all floor constructions. Integrated flow rate control valve for increased regulation of the flow rate and temperature of the underfloor heating system. Standard 210mm manifold spacing and 1” BSP connections allows for use across wide range of manifold products. Includes a temperature gauge measuring the mixed flow temperature, auto air vent and bracket to support the weight of the pump. |
|
|
1" BSP Male fittings for connection to the manifold.
Pressure class PN10, working pressure 10 bar (1.0 MPa).
Control flow temperatures to +/-3°c.
Maximum temperature of 95°c. Operating temperature between 20°c and 45°c.
The blending valve supplied with this kit is capable of managing underfloor heating systems up to 230m2, which is more than enough for even a 12-port manifold.
