• Total size 1250mm x 850mm x 20mm• Suitable for 15mm, 16mm, and 17mm pipes• Pipe Centres can be at 100mm, 150mm, 200mm and 250mm• Easy to install • Made from Recycled High Impact Polystyrene• Minimum amount of waste• Eliminates pipe contact with insulation• Each panel will cover just above 1 square metre • Colour - black
The actuator is 2 wire thermal actuator. 230v powered 2 wire normally closed M30 thread stroke lenght 3mm
Designer Stainless Steel Angled Water Isolating Valves Wall Mounted 1/2" M x 1/2"M Ideal for connecting to toilets cold feed, showers, basin mixer taps flexible tails & bidet Douche sprays Can be used in place of an outlet elbow but with the added feature of being able to isolate the water supply. Complete with Stainless Steel disc (Wall flange)
Conversion from 15mm cooper pipe to 16mm plastic pipe(2mm wall thickness).
Manifold Flow Regulator for adjusting the flow rate on manifold. Flow Meter / Regulator For underfloor heating manifold Flow rates from 0-5l/min
For use with tacker gun. Pipe Ø 15÷20 Material: polypropylene Mounting: one point chisel Package: glue with tape
This 7-day programmable thermostat is designed for floor warming application or helping to limit floor temperature. This thermostat can conform to electrical heating or water heating system.
For use with manifold. Buying eurocone connector you will receive: olive,nut and insert
15 mm x 3/4" Angle Washing Machine Tap. Each tap is supplied with a red and a blue lever. colour-Chrome Plated connection-Compression x BSP fitting type-Angled Tap material-Brass size-15 mm x 3/4" suitable application-Washing Machine Taps 1 Extra olive -15mm Brass
Used in hot or cold water systems to isolate part of the system; avoids the need to drain down the whole system to carry out work. Made in brass with compression fittings and a Red Handle . approved by WRAS colour-Red Handle connection-Compression finish-Chrome fitting type-Brass, Chrome Plated size-15 mm Wärmer System PSW TRADE SUPPLIERS LTD