• Total size 1250mm x 850mm x 20mm• Suitable for 15mm, 16mm, and 17mm...
The actuator is 2 wire thermal actuator. 230v powered 2 wire normally...
Designer Stainless Steel Angled Water Isolating Valves Wall Mounted 1/2"...
Conversion from 15mm cooper pipe to 16mm plastic pipe(2mm wall thickness).
For use with tacker gun. Pipe Ø 15÷20 Material: polypropylene Mounting:...
Manifold Flow Regulator for adjusting the flow rate on manifold. Flow...
This 7-day programmable thermostat is designed for floor warming...
For use with manifold. Buying eurocone connector you will receive:...
No manufacturer
No supplier
Tags
• Total size 1250mm x 850mm x 20mm• Suitable for 15mm, 16mm, and 17mm pipes• Pipe Centres can be at 100mm, 150mm, 200mm and 250mm• Easy to install • Made from Recycled High Impact Polystyrene• Minimum amount of waste• Eliminates pipe contact with insulation• Each panel will cover just above 1 square metre • Colour - black
The actuator is 2 wire thermal actuator. 230v powered 2 wire normally closed M30 thread stroke lenght 3mm
Designer Stainless Steel Angled Water Isolating Valves Wall Mounted 1/2" M x 1/2"M Ideal for connecting to toilets cold feed, showers, basin mixer taps flexible tails & bidet Douche sprays Can be used in place of an outlet elbow but with the added feature of being able to isolate the water supply. Complete with Stainless Steel disc (Wall flange)
Conversion from 15mm cooper pipe to 16mm plastic pipe(2mm wall thickness).
For use with tacker gun. Pipe Ø 15÷20 Material: polypropylene Mounting: one point chisel Package: glue with tape
Manifold Flow Regulator for adjusting the flow rate on manifold. Flow Meter / Regulator For underfloor heating manifold Flow rates from 0-5l/min
This 7-day programmable thermostat is designed for floor warming application or helping to limit floor temperature. This thermostat can conform to electrical heating or water heating system.
For use with manifold. Buying eurocone connector you will receive: olive,nut and insert
For use with 15mm compression fittings:elbow,coupling,tees. Buying eurocone connector 16x15 you will receive: olive,nut and insert Check photos for different connections.
Multilayer piping systems PEX for hot and cold water installations inside buildings. Pipe that lays flat,stays flat and it's ultra flexible. Suitable for vented and sealed,underfloor and central heating systems. Specification: EN ISO 21003 AENOR CLASS 1-2-4-5/6 Bar Wras Approved TMax: 95oC PMax: 10 Bar
Spreader plates are laid across traditional joists and fixed in place using a hand stapler. Size:390mm x 1000mm Suitable for joist centres of 400mm.
For use with copper pipe,pex pipe,plastic pipe.It serves as layer of insulation to the transmission lines for hot water in the building. 10m long.
PEX AL PEX SYSTEM Material:Nickel Plated Brass Max Temperature(at 6bar): +95C Degrees Max Pressure(at 60C degrees):1,0 MPa(10 Bar)
For use with copper pipe,pex pipe,plastic pipe.It serves as layer of insulation to the transmission lines for hot water in the building. 10m long.
For use with copper pipe,pex pipe,plastic pipe.It serves as layer of insulation to the transmission lines for hot water in the building. 10m long.
PEX AL PEX SYSTEM Material:Nickel Plated Brass Max Temperature(at 6bar): +95C Degrees Max Pressure(at 60C degrees):1,0 MPa(10 Bar)
PEX AL PEX SYSTEM Material:Nickel Plated Brass Max Temperature(at 6bar): +95C Degrees Max Pressure(at 60C degrees):1,0 MPa(10 Bar)
Multilayer piping systems PEX for hot and cold water installations inside buildings. Pipe that lays flat,stays flat and it's ultra flexible. Suitable for vented and sealed,underfloor and central heating systems. Specification: EN ISO 21003 AENOR CLASS 1-2-4-5/6 Bar Wras Approved TMax: 95oC PMax: 10 Bar